Synthetic leather is obtained by coating on release paper layers of PVC and/or polyurethane (PU).   These are dried at high temperatures through coating line ovens.   Before the detachment and the consequent separation of the product...

The Drying Oven with Conveyor mod. FOP/T’s main features are: – Heating system, which is equipped with a recirculation fan, an oil battery, blowing channels, an air recovery channel and a filter. To ensure uniform heating and air distribution, fields are...

The Flocking Machine mod. FR2 consists of: – Two electrostatic hoppers with two multi-row rotating brushes. Each brush is opposed to a stainless steel screen. Rotation speed and pressure are both adjustable and the screen can easily be removed – A lifting...

The Flocking Machine mod. FR6 consists of three base modules, each one consisting of: – Two electrostatic hoppers with two multi-row rotating brushes. Each brush is opposed to a stainless steel screen. Rotation speed and pressure are both adjustable. –...

The Coating Machine mod. BSR/F is used to coat fabric (with resin and/or adhesives). The machine’s features are: – Easy implementation: the coating machine can be placed at the inlet of a common stenter – Maximum control over compound quantity; process...

The Laminating Group mod. GRA/1 is for wet lamination and dry-coat lamination technology. It consists of: – Upper unwinding unit with aligning system of the fabric to be laminated with fabric unwinding position with couples of beam-holder self-closing chucks...

Highly reliable electronic assembly: - Stabilized delivered tension, which remains constant independently from flocking machine operating conditions. - The generator is equipped with an “anti-stalactite” device: in case flock stalactites cause excessive...

The Coating Head mod. BS has been designed and built to coat using machinery that can be easily implemented. The following are some of the advantages that come with this machine: – The machine can be placed at the inlet of a common stenter, occupying minimum...

    The Brushing Unit mod. SZ2 consists of: - Two rotating brushes with a “beater-bar” effect that is opposed to the flocked fabric and with adjustable pressure. Brushes are sealed inside the suction chambers, in order to avoid flock...

The Rotary Screen Coater mod. BS1 is used to coat and print fabric (with pigments, resin and adhesives) and for pattern flocking. The machine’s main features are: – Rotary screen pneumatic lifting – Removable internal paste feeding pipe – Manual...

    Drying Oven for Coating Lines mod. FOP/C’s main features are: – Heating system, which is equipped with a recirculation fan, an oil battery, blowing channels, an air recovery channel and a filter. To ensure uniform heating and air distribution,...

  The Laminating Line mod. AT2 is composed of: – Unwinding Group mod. UT2/AS, consisting of: UNWINDING TROLLEY FOR LARGE ROLLS mod. UT2 AXIAL UNWINDER mod. AS with universal fast joint for unwinding trolley connection – Coating Head mod. BS2,...

Highly reliable electronic assembly. - Stabilized delivered tension, which remains constant independently from the flocking machine’s operating conditions. - The generator is equipped with an “anti-stalactite” device: in case flock stalactites cause...

The Rotary Screen Coater mod. BS1/T is used to coat and print fabric (with pigments, resin and adhesives), and for pattern flocking. The machine’s main features are: – Rotary screen pneumatic lifting – Removable paste feeding pipe with doctor...

The Electrostatic Generator mod. GE-100-1-EASY represents a new technological concept and allows excellent flocking quality as well as a higher degree of safety during the working process. It consists of: – Electrostatic generator and this is equipped with an...

      The Flocking Trolley mod. TCR/COMPL has to be assembled on the end shoulders of a flat screen printing machine. The flocking trolley runs back and forth on two rails mounted on the printing machine’s shoulders. The trolley and printing machine...

  The system is composed of one or more Flocking Units that can be mounted on the stations of any flat screen printing line. Each flocking unit is loaded with flock of a different colour. As the fabric stops in between printing phases, the units flock the...

    The Coating Machine mod. BSR/M is used to coat fabric (with resin and adhesives). The unit can be used for air-coating, coating on cylinder, and coating on photo-engraved cylinder. The machine’s features include: - Easy implementation:...

  The Electropneumatic Flocking Machine mod. FR/ESP is designed for the flocking of profiles with undercuts. It is a modular unit that is normally inserted next to the flocking machine with hopper and before the profile pre-cleaning system. It is used for...

  The features of the Coagulation Line - mod. LC are: - Fabric, unwound from rolls, is threaded through the accumulator. The accumulator contains 40 linear meters of base-cloth, providing sufficient time to replace an empty roll with a new roll and joining...

  Compact sizes and easy handling allow industrial productions and/or sampling. The unit consists of two separate elements: - The containing/dosing group - The spraying group The containing/dosing group is a special flock container, where there is a...

The Coating Machine mod. BSR/R is used to coat fabric, paper and TNT (with resin and adhesives). The machine’ features are: – Easy implementation: the coating machine can be placed at the inlet of a common stenter/oven – Maximum control over compound...

Features of the Stenter mod. RAM/F: – Heating system; equipped with a circulation fan, a battery, oil related blowers, channel recovery and a filter. To ensure uniform heating and air distribution, the fields are opposing right/left. In order to reduce the...

The main features of a Stenter with Double Heating mod. RAM/S are: – Heating system; built in order to obtain different temperatures above and below the product. This system makes the Stenter with Double Heating mod. RAM/S particularly suitable for dry carpets...

This is an oven structure with forced convection and indirect exchange with hot air recirculating around the electric resistances. The structure is made with bars and panels in carbon steel and galvanized steel inside, with thermic insulation with rock wool and...

The Calendering Unit mod. GG/IR can operate with hot or cold calendering roll. It consists of: – Two heavy duty and steady machine shoulders which carry all the machine elements – Counter roller covered with hard neoprene rubber – Hard chromed ground...

    The Laboratory Flocking Line mod. LFL consists of: - A trolley supporting frame for all machine elements. - One hopper with variable speed, a motorized rotating brush with an adjustable through inverter. A handwheel is provided for height...

The Laboratory Oven & Direct Coating Head mod. JP consists of: – An oven with electric batteries that can operate with different heating modes such as static heating, low ventilation heating, upper side heating and lower side heating (or both sides...

The Manual Flocking Device mod. EASY FLOCK/N is a flocking unit for samples and limited/batch productions. It can be supplied in two different versions: – Unit with built-in electrostatic generator, fed by rechargeable battery (average of 8 h working time)...

The Powder Distribution Unit mod. TDP/M consists of one hopper containing powder, with an inverter-controlled dosing cylinder of adjustable speeds placed at its base. A doctor blade opposed to the cylinder is used to adjust powder output. A rotating brush is mounted...

  The Flocking Machine mod. TT2 is designed to flock objects and flat surfaces. The machine consists of: – One variable speed motorized conveyor belt made with a fiberglass net – Two Plexiglas flocking hoppers – Two rotating brushes inside the...

The Flocking Machine mod. TTS is designed to flock car glove boxes and objects. The unit consists of: - A completely sealed cabin to prevent flock pollution - A variable speed conveyor belt that can be equipped with special adaptable feeding guides for...

  The Flocking Machine mod. TO is designed to flock t-shirts and can be mounted on common carousel printers. It can be supplied in two different versions, with or without flock collector or suction unit. It is equipped with: – A flocking hopper, equipped...

    Flocking Machines mod. TO/S are designed to flock t-shirts and sheets and can be mounted on common carousel printers. Two or more Flocking Machines mod. TO/S can be fitted on a carousel printer and used for multicolor flocking. Each unit...

  The Vibrating Cleaner for Sheets mod. PFA consists of: – A frame made of welded profiles – Suction mouth with variable opening, to adjust air intake – One suction fan, connected with filter sleeves for flock recovery Cleaning of exceeding...

The Sanding Line (Sanding Belt System) - mod. LSN consists of: - Unwinder - Drawing Group - Sanding Machine (Belt System) - Brushing Group - Combined Rewinder - Dust Extraction Group - AC Motorization & Control Panel Two possibilities of operation: -...

The Three Head Printing Line mod. LST allows: – The reduction of the cost of the printing cylinders (only the external shell is replaced) – Easy access to replace the printing cylinders – Change in the fabric tension when the machine stops or when the...

AIGLE has developed an innovative system to flock designs on three-dimensional objects. The system ensures: - Simple application on objects of different shapes and curved surfaces - Reduced industrial costs through the use of pad printing techniques - Abrasion...

Application systems for hot-melt lamination lines: – System with smooth or engraved cylinder – Slot system. Aigle collaborates with Bridarolli Srl in the use of hot-melt systems. The combination of these experiences allows us to offer a reliable and...

The coating system for fabric pre-treatment for digital printing, consists of doctor-blade coating on a fabric to increase the printing quality digitally done. Coating takes place directly at the inlet of the printing line. The fabric is then pre-dried and fed onto...

Coagulation lines are used for the production of filters and synthetic leather. This is a wet process. The substrate is first impregnated or squeegeed or slotted and then placed in contact with water diluted with other chemical compounds. The characteristics of the...